User's Manual

Accessing a Remote Management

Information Base

Use these commands to examine the MIB of any remote network node

that provides a standard SNMP/MIB implementation.

For More Information This section lists the remote MIB commands

together with their syntax and functions. For a more detailed descrip-

tion of these commands, refer to the Operator’s Reference.

Command Syntax The following example of the Rgetw command

demonstrates the conventions used in this table:

rgetw identifier [x.x.x.x] [community]

where:

rgets is the command name

identifier is a required value that you provide

[x.x.x.x] and [community] are optional values that you provide

Command Function

rgetmw identifier [x.x.x.x] [community] Display the value of a branch of MIB

variables from a remote HP or Wellfleet

router.

rgetw identifier [x.x.x.x] [community] Display the value of an individual MIB

variable from a remote HP or Wellfleet

router.

These commands display their output on the console screen. To output

the display to a printer or file instead of the console screen, place the

command syntax within the Print command. For detailed information on

the Print command, refer to the Operator’s Reference.

NCL

Commands

How To Use the Network Control Language (NCL) Commands To Manage a Router

Accessing a Remote Management Information Base

7-23