User's Manual

The Alphabetical Hotkeys
These keys vary, depending on which parameter in the Quick
Configuration screen is currently selected. They either change the
setting of the currently highlighted parameter or take you to the
indicated screen in the Configuration Editor, where you can configure
parameters that are not available in the basic Quick Configuration
screen. In most cases (except for certain X.25 parameters on HP
routers that have the X.25 service), you won’t need these keys unless
you must access parameters that are not displayed in Quick
Configuration.
For example, if you type / while the cursor is on the ‘‘System name’’
field in the Quick Configuration screen, you will see the following
display.
‘‘E’’ option
Figure 3-10. The Hotkey Menu
How To Use Quick Configuration
How To Use the ‘‘Hotkeys’’
3-14