User's Manual

Replacing One Type of Interface Module with Another Type
Replacing a previously configured interface module with another
module having a different set of ports, and subsequently starting Quick
Configuration results in a ‘‘Configuration Conflict Alert’’. For example,
the following screen illustrates an HP Router 650 with one configured
WAN interface module.
Moving the WAN interface module indicated above to slot 4 and
installing an Ethernet interface module in its place (slot 2) creates a
configuration conflict. If Quick Configuration is subsequently started, a
warning screen similar to the one shown in figure 3-25 appears.
Figure 3-24. One WAN Interface Module Installed and Configured
How To Use Quick Configuration
Operating Notes
3-36