User's Manual

Operating Notes
TFTP Access
TFTP access enables you to automatically configure a remote router to
accept a configuration file via TFTP PUT from a specific IP address.
That is, if the ‘‘TFTP Client IP Address’’ field contains an address, then
the remote router that downloads the Quick Remote configuration
containing that address will subsequently accept a TFTP PUT of a
configuration file from that address. But if no address is provided in a
Quick Remote configuration, then the remote router that downloads
that configuration will not accept a TFTP PUT request.
How To Use the ‘‘Hotkeys’’
The hotkeys in Quick Remote let you control display features or exit
from Quick Remote, and operate in the same way as the numeric
hotkeys described in chapter 3, ‘‘How To Use Quick Configuration’’.
For further information, refer to ‘‘The Numeric Hotkeys’’ on page 3-13.
To display the hotkey menu: Type the forward slash (/).
TFTP Client field
Figure 8-5. Example of a Quick Remote Screen With TFTP Client Field
How To Use Quick Remote
Operating Notes
8-14