User's Manual

To Use Quick Configuration To Delete the Non-Existent Ports
from the Configuration:
1. Move the cursor to any row occupied by one of these ports. The Help
window will then display the messages indicated below:
2. Press the [Ctrl] [D] key combination to delete the configuration for the
nonexistent interface module. You will then be prompted with the
message
Are you sure you want to delete the old configura-
tions for this empty slot?
3. Type y and press [Return] to delete the configuration for the empty slot.
Notice that the highlighted port labels for the deleted ports will remain
in the Quick Configuration screen until you save the new configuration
and exit from the Quick Configuration utility (described in the following
steps).
Help message indicating
port configurations for
which there is no hardware
present
Cursor positioned in any configured row for
which the interface module has been removed
Figure 3-23. Removed Ports for which a Configuration Exists
How To Use Quick Configuration
Operating Notes
3-34