Computer Setup (F10) Utility Guide

12 www.hp.com Computer Setup (F10) Utility Guide
Computer Setup (F10) Utility
Security Smart Card Options Allows you to enable/disable the Smart Card
to be used in place of the Power-On Password.
Setup Password Allows you to set and enable setup
(administrator) password.
✎
If the setup password is set, it is required
to change Computer Setup options, flash
the ROM, and make changes to certain
plug and play settings under Windows.
See the Troubleshooting Guide on the
Documentation and Diagnostics CD for more
information.
Power-On Password Allows you to set and enable power-on
password.
See the Troubleshooting Guide on the
Documentation and Diagnostics CD for more
information.
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Allows you to:
• Lock legacy resources (appears if a setup
password is set)
• Enable/disable network server mode
(appears if a power-on password is set)
• Specify whether the password is required
for warm boot (CTRL+ALT+DEL)
(appears if a power-on password is set)
See the Desktop Management Guide on the
Documentation and Diagnostics CD for more
information.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.