Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility Guide www.hp.com 23
Computer Setup (F10) Utility
Advanced*
(continued)
*For advanced
users only.
Onboard Devices Allows you to set resources for or disable
onboard system devices (diskette controller,
serial port, or parallel port).
PCI Devices • Lists currently installed PCI devices and
their IRQ settings.
• Allows you to reconfigure IRQ settings for
these devices or to disable them entirely.
These settings have no effect under an
APIC-based operating system.
PCI VGA Configuration Displayed only if there are multiple PCI video
adapters in the system. Allows you to specify
which VGA controller will be the “boot” or
primary VGA controller.
✎
In order to see this entry, you must enable
Integrated Video (Advanced > Device
Options) and Save Changes and Exit.
Bus Options On some models, allows you to enable or
disable:
• PCI SERR# Generation.
• PCI VGA palette snooping, which sets the
VGA palette snooping bit in PCI
configuration space; only needed when
more than one graphics controller is
installed.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.