User's Manual

MenuandToolbarOptions

3Com®AirProtectPlannerUserGuide

Figure 43. Adding an AP – 802.11n Advance Parameters

Definethedesired802.11nadvanceparameters.

• MIMOconfiguration:SelecttheMIMOconfigurationfromthedrop‐downlist

• Channelwidth(MHz):SelecttheChannelwidthfromthedrop‐downlist

• Guardinterval(ns):SelecttheGuardintervalfromthedrop‐downlist

• FrameAggregation:SelecteitherAMSDUor

AMPDU,orbothcheckboxesforframeaggregation.

Formoredetailsontheadvanceparameters,refertoAppendixD:GlossaryofTerms

ModifyAP

Click<Modify>ontheAccessPointRepositorydialogboxtomodifyanexistingAP.TheModifyAccessPointdialogbox

appears.

Figure 44. AP Repository – Modifying an AP

TheModifyAccessPointdialogboxissimilartotheAddAccessPointdialogbox.

DeleteAP

Click<Delete>andconfirmthedeletionofanAP.

5.5.2 SensorRepository

SelectSensorRepositoryfromtheToolsmenu.