User's Manual

WLANPlanningWizard
3Com®AirProtectPlannerUserGuide
64
Figure 79. Capacity Planning Summary – Passed? (Orange)
• IftheCapacityFeasibilityCheckis‘Failed!’,Planneralsogivesthepotentialreasonforthefailure.
Figure 80. Capacity Planning Summary – Failed!
Click<Failed>toviewthereasonforfailure.The‘What‐IfScenarioAnalysis’isusefultounderstandthereasonfor
failure.
Conditionsforfailure:
¾ IftheexpectedcapacityyouspecifiedisgreaterthantheestimatedcapacitywithoutWi‐Fiinterference,the
plannedcapacityisnotfeasible.
¾ If
theexpectedcapacityyouspecifiedisgreaterthantheestimatedcapacitywithWi‐Fiinterference,theplanned
capacityisnotfeasible.
Onceyouclick<Finish>ineitheroftheabovesummaryscreens,PlannerstartsAutoDevicePlacement
explainedindetailin
thenextsection.
6.2 AutoDevicePlacement
PlannerconsidersthefollowingfactorsduringAutoDevicePlacement.