Upgrade and Service Guide

20 599977-001 — Upgrading or Replacing Memory
Installing a New Memory Card
1 Orient the new memory card so that the notch on the
edge of the card faces forward and is on the right.
2 Holding the card by its edges, slide it all the way into
the slot.
3 Make sure the card is pressed all the way into the
socket and then gently push down on the card to snap
it into place.
4 Replace the side cover.
5 Replace the back cover above the stand.
6 Place the computer in an upright position.
7 Plug in the power cord.
NOTE: The replacement memory card may not look
exactly the same as the original drive due to different
manufacturers or models. Hewlett-Packard always
provides quality parts that meet or exceed your original
computer specifications.