Technical data

Booting Your Series 400 Workstation
3-3
Table 3-1. Power-up Screens for HP-UX
If you see... You need to...
Power-up display Wait for the system to complete booting
Power-up display without the
operating system listing
Install HP-UX
Main Configuration Menu Proceed to “Configuring the Boot ROM”
Remote console at xxx...
Type
L < Return > 5 to 15 seconds after seeing
the message
A blank screen 1. Set the Service/Normal switch to Normal
2. Press
< Return >
3a. If you see a blank screen:
type R < Return >
3b. If you don’t see a blank screen:
1. Type
CF < Return >
2. Proceed to “Configuring the Boot ROM”
An EEPROM error message Call your designated service representative
NOTICE: All keyboard entries need to be uppercase.