Technical data

Booting Your Series 400 Workstation
3-6
Select HP-UX Compatible by typing 2 < Return > if you will boot an
HP-UX compatible operating system.
After you select a boot mode, you see the prompt shown in Figure 3-3.
If you want to save the boot mode selection, select Permanent (P). If you save it,
the boot mode is remembered when you cycle the system’s power and you will not
have to reset the boot mode.
If you don’t want to save the boot mode selection, select Temporary (T). If you
don’t save it, the boot mode is forgotten when you power off and you must reset it
when you power on the system.
For example, if you normally boot HP-UX, you select HP-UX Compatible as the
permanent boot mode. However, if you need to boot Domain occasionally, you
temporarily select Domain Compatible. Therefore, Domain/OS will boot this time
and HP-UX Compatible operating systems can boot afterwards.
You type E < Return > to exit the menu, save your menu selections, and boot the
operating system.