Technical data

Booting Your Series 400 Workstation
3-14
Selected System
The Selected System mode provides you with the opportunity to select a mass stor-
age device to boot from. A list of mass storage devices appears in the upper-right
of your screen. You enter the two or three character sequence to the left of the mass
storage definition and press < Return > to select the operating system you wish to
boot. For example, type 1H < Return >.
Set the Store System Selection mode to store the boot path of the operating system
that you just selected by typing 3 < Return > , if you wish to automatically boot
that system in the future. The stored operating system is automatically booted in all
future boots, until you change your selection.