Technical data

Getting Started with HP-UX
5-10
Figure 5-4 demonstrates an example that assumes an HP A1416A video card. In
this example, the response to “TERM = (hp)” is 98550. If your monitor does not
appear to be functioning properly, make sure that you have one of the configura-
tions described in Table 5-1. If you do, then call your local representative.
If you have successfully completed all of the previous steps, HP-UX recognizes
you as a valid user and you are logged in. You see a screen with a prompt on it, as
shown in Figure 5-4 (the prompt may not be “$”).
Refer to A Beginner’s Guide to HP-UX for more information about the login process.