Technical data

4-46 Fault Isolation
4.9.6 Boot ROM Messages
Table 4-10 lists and explains the messages displayed for Boot ROM functions. If nec
-
essary, it also indicates a procedure to resolve the problem.
Table 4-10. Boot ROM Displayed Status Messages
Displayed Message Meaning and What To Do
CONFIGURE MODE
Bit Mapped Display
BOOTING A SYSTEM
(n) Bytes
Console Keyboard at (select code)
DMA
HP-HIL Keyboard
HP-IB
HPnnnnn (type) at (SC)
HP98265 (SCSI [E] SC)
LOADING MEMORY
MC68030 Processor
MC68882 Coprocessor
Remote Interface at (select code)
RESET To Power UP
System unit is in configure mode. Press B, F, I, or
X and RETURN.
Bit-mapped video board identified.
An operating system is booting.
Memory amount in decimal. Message appears after
memory test completes.
Remote keyboard circuit found at the select code
indicated.
DMA circuit identified.
CPU board HP-HIL circuit identified. Keyboard
may now be used.
HP-IB interface circuit identified.
HP interface circuit identified:
nnnnn = product number
type = interface type
SC = select code
Found either the DIO-II accessory card or an
equivalent circuit on the CPU board.
HP SCSI interface circuit identified:
[E] = S for single-ended
D for differential
SC = select code
Found either the DIO-II accessory card or an
equivalent circuit on the CPU board.
Memory is loading with Boot ROM code.
MC68030 CPU identified.
MC68882 CoCPU identified.
Remote interface identified at the indicated select
code.
Press RESET to re-start power-up.
(Continued)