Technical data

FRU Removal and Replacement 5-9
5.3.4 HP-IB Interface Board Removal and Replacement (Model 400t and 400dl)
Figure 5-7 shows how to remove the HP-IB interface board. First remove the graphics
board. Disconnect the cable from the HP-IB board. Remove the two mounting screws,
and slide the board from the slot. Remove the mounting plate from the HP-IB board
by removing the two mounting plate screws. Attach the mounting plate to the new
HP-IB board. To replace the board, reverse the removal procedure.
Figure 5-7. HP-IB Interface Board Removal (Model 400t and 400dl)