Technical data

FRU Removal and Replacement 5-11
5.3.6 Emulator Board Removal and Replacement (Model 400t and 400dl)
Figure 5-9 shows how to remove the Emulator board. First remove the graphics board.
Remove the five screws, then carefully lift the board to disengage the IC pins from the
socket on the CPU board. Slide the board through the empty graphics board slot out
the top of the system unit.
To replace the Emulator board, reverse the removal procedure. When you seat the
Emulator board, carefully insert the Emulator board’s IC pins into the socket on the
CPU board.
Figure 5-9. Emulator Board Removal (Model 400t and 400dl)