Technical data

5-32 FRU Removal and Replacement
Follow these steps to replace the trim plates:
1. With the trim plate’s smooth side towards the outside, insert the trim plate into
its position on the system unit between the chassis and the bezel.
2. Vertically align the trim plate’s catches with their notches in the chassis:
• On the system unit’s right side, there are two notches on the back edge of
the chassis trim.
• On the system unit’s left side, there are two rectangular holes on the front
left side of the chassis.
3. Push the top of the trim plate back. Then push it towards the inside to hook the
top trim plate catch in its chassis notch or hole.
4. Repeat step 3 for the bottom of the trim plate.