Technical data

FRU Removal and Replacement 5-41
Follow these steps to replace the mass storage power distribution cable:
1. Position the power cable in the unit with the end having two connectors close
to each other at the top.
2. Fit the power cable to the top cable clip with the two top connectors above the
top cable clip.
3. Fit the power cable to the bottom cable clip with one cable connector between
the top and bottom cable clip,
4. Connect the power cable’s end connector to the motherboard’s back power
cable connector.
5. Connect the power cable to the mass storage devices.
6. Replace the mass storage devices and all other assemblies that you removed
earlier.