Technical data

Conﬁ guring Domain/OS Systems B-1

Appendix B

Selecting the Operating Mode

and Network Priority on

Domain/OS Systems

This appendix describes how to select the Domain Compatible mode and network

priority for systems that run Domain/OS. The system EEPROM stores this informa

tion.

B.1 Selecting Domain Compatible Mode

Perform the following procedure to conﬁgure the system to run in Domain Compatible

mode. You must perform Procedure B-1 if any of the following occur:

• You have replaced the system EEPROM with a new EEPROM that is conﬁg

ured in HP-UX Compatible mode or Undeﬁned mode.

• The EEPROM mode conﬁguration is corrupted, possibly because of electro

static discharge when handled without using a grounding strap.

• A Domain/OS system ships from the factory with an incorrect operating mode

set.