Technical data

C-8 Conﬁ guring the EEPROM

Table C-3. Boot Mode Selection Top/Left Four Amber LED Patterns

Undetermined HP-UX Domain

Power-Up Display

The following Conﬁguration Control Mode screen appears when you ﬁrst turn a new

system unit on. The Conﬁguration Control menu is in the upper right-hand corner.

Hewlett-Packard Company,

Series 400 Rev. 1, 5 Jun 90

md 12 rev 0.20, 1990/03/12.16:31:17

Bit-Mapped Video

MC68030 Processor

Configuration EEPROM

HP-HIL.Keyboard

RAM 4194080 Bytes

Configuration Mode

RESET to Power-up

Configuration Control

Keys Control Class

-----------------------------

1 I/O Configuration

2 Boot Mode Selection

A Abort without changes

-----------------------------

Type [key] Return ?

The next to the last line at the bottom identiﬁes the system unit as being in the Conﬁgu-

ration Mode.

Note the line on the left side that reads

Configuration EEPROM. If the conﬁguration

information in the EEPROM could not be accessed or correctly applied, the line would

read

Configuration EEPROM Failed

That means that one or more of the Conﬁguration Control Classes has not worked cor-

rectly. You may have to replace the CPU board.