Technical data

Confi guring the EEPROM C-21
C.4.6 Small Computer Systems Interface Configuration
Enter the SCSI menu by typing the command key for the SCSI interface. The Configu
-
rable Interfaces menu changes to the SCSI menu:
SCSI
Key Feature Value
--------------------------
1 Select Code 14
2 Interrupt Level 3
3 Parity Y
4 Bus Address 7
X to exit menu
--------------------------
Type [key] RETURN ?
SCSI Select Code
From the SCSI menu, type the command
1 and the prompt line changes to
1 Select Code 14
used select codes are :
9 12 15 21
Type 0.. 31 except used RETURN ?
Note the select codes already used. Type the command for the select code you want
to use. After you have entered the select code, the SCSI menu changes to show your
change.
SCSI Interrupt Level
From the SCSI menu, type the command
2 and the prompt line changes to
2 Interrupt Level 3
Type 3, 4, 5, or 6 RETURN ?
Type the command for the interrupt level you want to use. After you have entered the
new interrupt level, your SCSI menu changes to show your change.
SCSI Parity Mode
From the SCSI menu, type the command
3 and the prompt line changes to
3 Parity Y
Type Y or N RETURN ?