Technical data

Confi guring the EEPROM C-25
9. When the Configuration Control menu appears and the system unit is turned on
for the first time, you should type the following command to enter the Auto System
Select Mode:
2 < Return >
10. If you have already selected an operating system, you should abort the menu with-
out changing it by typing this command:
A < Return >
C.5 Auto System Select Mode
After configuring the system unit’s Boot Mode Selection for HP-UX and I/O Con-
figuration, you should use the Auto System Select Mode to determine what operating
system is automatically booted when you turn on your workstation.
From the following Configuration Control menu
Configuration Control
Keys Mode Class
----------------------------
1 I/O Configuration
2 Auto System Selection
3 Boot Mode Selection
A Abort without changes
----------------------------
Type [key] RETURN ?
type the command
2 < Return >
causes this Auto System Select menu to appear:
Auto System Select
Keys Option Status
----------------------------
1 Scan for System Y
2 Selected System N
3 Store Selected Sys. N
E Execute menu
A Abort without changes
----------------------------
Type [key] RETURN ?