Technical data

2 Index
boot shell
diagnostics (Domain), 4-26
phase II (Domain), 4-14
booting
problems, troubleshooting flowchart
(Domain), 4-12
over the LAN (HP-UX), 4-36 to 4-37
buses, system, 3-3 to 3-9
C
calendar, 4-17
calendar battery
checkout
Model 400s (Domain), 4-77
Model 400t and Model 400dl (Domain),
4-69
removal and replacement (Model 400t and
400dl), 5-21
calendar program, 5-21
card cage fan (Model 400s), 5-48
CD ROM disk drive, A-13
Central Processing Unit. See CPU
Centronics parallel interface, 3-13
chassis (Model 400s), part numbers, 5-85
checkout procedures, 4-60 to 4-77
Model 400s, 4-70 to 4-77
calendar battery (Domain), 4-77
power supply, 4-70 to 4-72
Model 400t and Model 400dl, 4-60 to 4-69
calendar battery (Domain), 4-69
power supply, 4-63 to 4-67
Winchester disk power, 4-68
using HP-UX ce.utilities, 4-74 to 4-76
circuit boards, A-1 to A-8
commands
go, 4-26
sh, 4-26
configuration control mode (HP-UX), C-7 to C-12
configuration EEPROM, theory of operation, 3-10
configurations
.25-inch QIC 60 MB tape drive, A-12
200 MB Winchester disk drive, A-9
330 MB Winchester disk drives, A-10
660 MB Micropolis hard disk drives, A-11
660 MB Winchester disk drives, A-10
802.5 network controller-AT, A-5 to A-6
Apollo Token Ring Network Controller-AT,
A-7
CD ROM disk drive, A-13
circuit boards, A-1 to A-8
CPU boards, jumpers and switches, A-1 to
A-2
DAT tape drive, A-14
HP A1096A, A-4
HP A1416A, A-3
HP A1442A Winchester disk drives, A-10
HP A1443A Winchester disk drives, A-10
HP A1447A DAT tape drive, A-14
HP A1444A Micropolis hard disk drive, A-11
HP A1448A CD ROM disk drive, A-13
HP A1449A 60 MB tape drive, A-12
internal mass storage devices, A-9 to A-15
jumper, A-1 to A-15
physical
Model 400s, 1-11 to 1-14
Model 400t and Model 400dl, 1-5 to 1-6,
1-8 to 1-9
PC coprocessor board, A-8
switch, A-1 to A-15
system unit (Model 400s), 1-15 to 1-16
VRX color graphics controller, A-3
VRX monochrome graphics controller, A-4
configuring
EEPROM (HP-UX), C-1 to C-29
internal interfaces (HP-UX), C-24 to C-25
memory, 4-23
connecting terminals (Domain), D-1 to D-2
connectors
Model 400s, 2-5
Model 400t and Model 400dl
internal power, 4-62
system unit, 2-3
continuous self tests (HP-UX), 4-53
continuous test, section of self test diagnostics (Do-
main), 4-18
controls
monitor, 2-6 to 2-8
Model 400s
power switch, 2-4
Reset switch, 2-5
SERVICE mode, 2-5
Model 400t and Model 400dl
power switch, 2-1
Reset switch, 2-1
SERVICE mode, 2-1