Technical data

Fault Isolation 4-19
How to Run the Self Test Diagnostics
The following three procedures show you how to force execution of the Self Test diag
-
nostics:
• Procedure 4-1 shows how to run Test diagnostics.
• Procedure 4-2 shows how to run Extended Test diagnostics.
• Procedure 4-3 shows how to run Continuous Test diagnostics.
Procedure 4-1. Running the Standard Self Test Diagnostics
1. Log out and stop any user processes.
2. Shut down to the MD prompt by typing the following at the “login:” prompt:
login: shut
3. At the MD prompt “ > ”, type the following:
> re < RETURN >
4. After the beeper sounds, press < RETURN > and type the following:
> te < RETURN >
end of procedure
Procedure 4-2. Running the Extended Self Test Diagnostics
1. Log out and stop any user processes.
2. Shut down to the MD prompt by typing the following at the “login:” prompt:
login: shut
3. At the MD prompt “ > “, type the following:
> re < RETURN >
4. After the beeper sounds, press < RETURN > and type the following:
> et < RETURN >
Answer the prompts as they appear.
end of procedure