Setup and Install

Installation Manual
H3C AR 18-2X Series Routers
Chapter 2 Installing the Route
r
2-3
2.2.2 Mounting the Router on a Vertical Surface
Mount the router on a vertical surface with four pan-head screws
and the four brackets at the bottom of the router.
Caution:
z Securely anchor these four mounting screws in the vertical surface.
If the screws are not properly anchored, strain of the network cable
connections can pull the router from the wall.
z Install the router in such a position that the LEDs can be read
easily.
z Securely fix the external power supply unit of the router, preventing
the power cord from falling down.
Follow these steps to mount the router on a wall or other vertical
surface:
Step 1: Install four pan-head screws on a wall or other flat vertical
surface (with reference to the distance between the four brackets as
shown in
Figure 2-1), and ensure that each screw sticks out 6 mm
(0.24 in.) on the wall.