Setup and Install

Installation Manual
H3C AR 18-2X Series Routers
Chapter 3 Starting and Maintaining
the Route
r
3-2
The HyperTerminal window displays the Connection Description
dialog box, as shown in
Figure 3-2.
Figure 3-2 Setting up a new connection
Step 2: Enter the name of the new connection in the Name field
and click <OK>. The dialog box, as shown in
Figure 3-3, displays.
Step 3: Select the serial port to be used from the Connect Using
dropdown menu. The serial port must be the same port connected by
the console cable.