Setup and Install

Installation Manual
H3C AR 18-2X Series Routers
Chapter 3 Starting and Maintaining
the Route
r
3-23
As shown in the above display, 1.1.1.1 is the IP address of the
TFTP server, and bootromfull is the Boot ROM upgrade file.
4) Execute the following command on the router to upgrade
Boot ROM.
<H3C> system-view
[H3C] upgrade bootrom full
WARNING: This operation will update the Boot ROM.
It may result in booting failure.
Caution!!! upgrade bootrom [Y/N]?y
Please wait, it may take a long time
The upgrade succeeds!
5) After the upgrade operation is complete, restart the router so
that the upgrade made to the Boot ROM takes effect. After
the router is restarted, you can use the display version
command to display the current Boot ROM version, or
directly enter the Boot ROM menu, so as to verify the
upgrade operation.
II. Upgrading Boot ROM Through FTP
1) Connect the FTP server to the router on which Boot ROM is
to be upgraded so that they can communicate with each
other. An FTP server is a device running the FTP server
program.
2) Specify the path on the FTP server to the folder that contains
the Boot ROM upgrade file, and set the username and
password. As shown in
Figure 3-9, configure the username
in the Profile text box and set a password. Make sure the
currently configured path contains the Boot ROM upgrade