White Paper

Emulex HBA ROM configuration

To configure the boot device for high availability on HP ProLiant servers, complete the following

steps:

1. While the server is booting, press Alt+E when the following message appears:

Press <Alt E> To Go To Emulex BIOS Utility.

2. The Emulex BIOS utility displays Emulex Adapters in the system. At the Enter a Selection

prompt, select the HBA index number.

Figure 14

3. From the HBA configuration menu screen, select option 2, Configure This Adapter’s

Parameters.

Figure 15

4. From Configure Adapter’s Parameters screen, select option 1, Enable or Disable BIOS. Press

1 to enable the BIOS; press Esc to return to the main menu.