HP Z220 SFF, Z220 CMT, Z420, Z620, and Z820 Workstations Maintenance and Service Guide

Heading Option Description
●
Legacy ACPI CPU Tables (Disabled/Enabled)—Reports CPUs in the ACPI
1.0 format. Not available on HP Z220.
Device Options Enable/disable the following device options:
●
Turbo Mode (Enabled/Disabled)—Allows Intel processers to run at
frequencies greater than the maximum (HP Z220).
●
S5 Wake-on-LAN (Enabled/Disabled)—Allows unit to be powered on over
the network.
●
Printer Mode (EPP+ECP, Output Only, Bi-Directional)
●
Num Lock State at Power-On (On/Off)
●
Integrated Video
1
(Enabled/Disabled)
●
IGD (Integrated Graphics Device) Memory—Displayed when Integrated
Video is Enabled. Sets the maximum amount of system memory that can be
allocated as graphics memory (32, 128 (default), 256, 512 MB). Not available
on HP Z420, HP Z620, or HP Z820.
1
●
Internal Speaker (Enabled/Disabled)
●
NIC/PXE Option ROM
2
Download (PXE/Disabled)
●
SATA RAID Option ROM
2
Download (Enabled/EFI/Disabled)
●
Multi-Processor (Enabled/Disabled)
●
Hyperthreading
1
(Disabled/Enabled)
●
PXE Option ROMS (Legacy, UEFI Only, Do Not Launch)—Available on HP
Z220 under Option ROM Launch Policy.
●
Mass Storage Option ROMS (Legacy, UEFI Only, Do Not Launch)—
Available on HP Z220 under Option ROM Launch Policy.
●
Video Option ROMS (Legacy, UEFI Only)—Available on HP Z220 under
Option ROM Launch Policy.
Slot Settings Lets you Enable/Disable Option ROM Download for each slot. Selective disabling
of Option ROM downloads can help manage limited Option ROM space. Limit
PCIe Frequency to Gen1, Gen2, Gen3. Runs slot at Gen1, Gen2, or Gen3
frequency.
●
Slot Option ROM Download (Enabled/Disabled)
◦
Limit PCIe Speed (Auto, 2.5 GB Gen1, 5 GB Gen2)—Not available on
HP Z220.
Management
Operations
Lets you set the following AMT (Intel Active Management Technology)
configuration options:
●
AMT (Enabled/Disabled)—Allows for remote discovery, repair and protection
of networked workstations. Enabling the AMT function also enables the
Network Controller (required for AMT to function correctly).
● Unconfigure AMT/ME (Disabled/Enabled)
2
—Restores AMT/ME defaults.
When you save and exit after enabling this option, you will be prompted to
complete the process upon restart. A Setup Password (even if one is set)
does not need to be entered to complete the process.
NOTE: Information about Intel AMT can be found at
www.intel.com.
●
Hide Un-configure ME Confirmation Prompt (Disabled/Enabled)
●
WatchDog Timer (Enabled/Disabled)—OS and BIOS WatchDog Timers can
be set independently (in minutes):
Computer Setup (F10) Utility 49