HP Color LaserJet Pro MFP M277 - User Guide

b. Open a Web browser, and in the address line, type the IP address or host name exactly as it displays

on the product control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If the Web browser displays a There is a problem with this website’s security certicate

message when attempting to open the EWS, click Continue to this website (not recommended).

Choosing Continue to this website (not recommended) will not harm the computer while navigating

within the EWS for the HP product.

2. Click the Scan tab.

3. On the left navigation pane, click the Network Folder Setup link.

4. On the Network Folder Conguration page, click the New button.

a. In the Network Folder Information section, enter the Display Name and Network Path. If required,

enter the network Username and Password.

NOTE: The network folder must be shared for this feature to work. It can be shared for only you or

for other users.

b. Optional: To secure the folder from unauthorized access, enter a PIN in the Secure the Folder Access

with a PIN section. This PIN will be required every time someone uses the scan to network folder

feature.

c. In the Scan Settings section, adjust the scan settings.

Review all the information, then click Save and Test to save the information and test the connection, or

Save Only to save the information only.

Set up the Scan to Network Folder feature on a Mac

1. Use one of the following methods to open the Embedded Web Server (EWS) interface.

Use a Web browser to open the HP Embedded Web Server (EWS)

a. From the Home screen on the product control panel, touch the Connection Information

button, and then touch the Network Connected button or the Network Wi-Fi ON button to