HP Color LaserJet Pro MFP M277 - Warranty and Regulatory Reference Guide

Дополнительные заявления для телекоммуникационных
(факсимильных) устройств
Положение ЕС относительно работы телекоммуникационных компаний
Данный продукт предназначен для подключения к аналоговой сети в странах/регионах Европейской
экономической зоны.
Он удовлетворяет требованиям Директивы ЕС R&TTE 1999/5/EC (Приложение II) и отмечен
соответствующей меткой CE.
Для получения дополнительной информации см. Заявление о соответствии, опубликованное
производителем в другом разделе данного руководства.
Однако, вследствие различий между отдельными национальными телефонными комутируемыми
сетями общего пользования не гарантируется эффективная работа продукта при подключении к
любой точке такой сети. Совместимость с сетью зависит от правильности настроек, установленных
пользователем при подготовке к подключению к телефонной коммутируемой сети общего
пользования. Следуйте инструкциям, приведенным в руководстве пользователя.
Если возникли вопросы относительно совместимости с сетью, обратитесь к поставщику оборудования
или в службу технической поддержки HP в стране/регионе использования оборудования.
При подключении к сети, возможно, потребуется ознакомиться с дополнительными требованиями,
установленными местным оператором телефонной коммутируемой сети общего пользования.
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another device connected to the
same line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
back of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In
most, but not all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as determined by the total RENs, contact the telephone company
to determine the maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
42 Глава 3 Регламентирующая информация RUWW