User manual

Update the rmware
HP oers periodic product updates, new Web Services apps, and new features to existing Web Services apps.
Follow these steps to update the product rmware for a single product. When you update the rmware, Web
Service apps will update automatically.
There are two supported methods to perform a rmware update on this product. Use only one of the
following methods to update the product rmware.
Method one: Update the rmware using the control panel
Use these steps to load the rmware from the control panel (for network-connected products only), and/or
set the product to automatically load future rmware updates. For USB-connected products, skip to method
two.
1. Make sure the product is connected to a wired (Ethernet) or wireless network with an active Internet
connection.
NOTE: The product must be connected to the internet to update the rmware via a network
connection.
2. From the Home screen on the product control panel, open the Setup menu.
●
For touchscreen control panels, touch the Setup button.
●
For standard control panels, press the left or right arrow button.
3. Scroll to and open the
Service menu, and then open the LaserJet Update menu.
NOTE: If the LaserJet Update option is not listed, use method two.
4. Check for updates.
●
For touchscreen control panels, touch Check for Updates Now.
●
For standard control panels, select Check for Update.
NOTE: The product automatically checks for an update, and if a newer version is detected, the update
proce
ss automatically starts.
5. Set the product t
o automatically update the rmware when updates become available.
From the Home screen on the product control panel, open the Setup menu.
●
For touchscreen control panels, touch the Setup button.
●
For standard control panels, press the left or right arrow button.
Scroll to and open the Service menu, open the LaserJet Update menu, and then select the Manage
Update
s menu.
Set the product to automatically update the rmware.
●
For touchscreen control panels, set the Allow Updates option to YES, and then set the Check
automa
tically option to ON.
●
For standard control panels, set the Allow Updates option to YES, and then set the Automatic
Check option to ON.
94 Chapter 8 Manage the product ENWW