User manual
c. Touch the Fax Setup menu.
d. Touch the Basic Setup menu.
e. Touch the Answer Mode setting.
f. Touch the Automatic option.
3. Continue to Step 3: Conīgure the fax time, date, and header on page 71.
Shared voice/fax line
Follow these steps to set up the product on a shared voice/fax line.
1. Disconnect any devices that are connected to the telephone jack.
2. Connect the telephone cable to the fax port on the product and to the telephone jack on the wall.
NOTE: Some countries/regions might require an adapter to the telephone cable that came with the
product.
NOTE: On some products, the fax port might be above the phone port. Refer to the icons on the
product.
3
. R
emove the plug from the telephone line out port on the rear of the product, and then connect a phone
t
o this port.
4
. Set the pr
oduct t
o answer fax calls automatically.
a
. T
urn the product on.
b.
From the Home screen on the product control panel, touch the Setup
button.
c. Touch the Fax Setup menu.
d. Touch the
Basic Setup menu.
e. Touch the Answer Mode
setting, and then touch the Automatic option.
5. Set the product to check for a dial tone before sending a fax.
NOTE: This prevents the product from sending a fax while someone is on the telephone.
68 Chapter 7 Fax ENWW