User manual

a.
From the Home screen on the product control panel, touch the Setup button.
b. Touch the Fax Setup menu.
c. Touch the
Advanced Setup menu.
d. Touch the
Detect Dial Tone setting, and then touch the On button.
8. Continue to Step 3: Congure the fax time, date, and header on page 71.
Step 3: Congure the fax time, date, and header
Congure the product fax settings using one of the following methods:
●
HP Fax Setup Wizard on page 71 (recommended method)
●
Product control panel on page 71
●
HP Embedded Web Server (EWS) and HP Device Toolbox (Windows) on page 72 (if the software is
install
ed)
NOTE: In the United States and many other countries/regions, setting the time, date, and other fax header
informa
tion is a legal requirement.
HP Fax Setup Wizard
Access the Fax Setup Wizard after initial setup and software installation by following these steps.
1. Click Start, and then click
Programs.
2. Click HP, click the name of the product, and then click HP Fax Setup Wizard.
3. Follow the on-screen instructions in the HP Fax Setup Wizard to congure the fax settings.
4. Continue to Step 4: Run a fax test on page 72.
Product control panel
To use the control panel to set the date, time, and header, complete the following steps.
1.
Fr
om the Home screen, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the
Basic Setup menu.
4. Scroll to and touch the Time/Date button.
5. Select the 12-hour clock or 24-hour clock.
6. Use the keypad to enter the current time, and then touch the OK button.
NOTE: Touch the 123 button to open a keypad that contains special characters, if needed.
7. Select the date format.
8. Use the keypad to enter the current date, and then touch the OK button.
9. Touch the Fax Header menu.
ENWW Set up to send and receive faxes 71