User manual

Congure IP network settings
Introduction
Use the following sections to congure the product network settings.
●
Printer sharing disclaimer
●
View or change network settings
●
Rename the product on a network
●
Manually congure IPv4 TCP/IP parameters from the control panel
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and
not of the HP printer drivers. Go to Microsoft at www.microsoft.com.
View or change network settings
Use the HP Embedded Web Server to view or change IP conguration settings.
1. Open the HP Embedded Web Server (EWS):
a.
From the Home screen on the product control panel, touch the Connection Information
button, and then touch the Network Connected button or the Network Wi-Fi ON button to
displa
y the IP address or host name.
b. Open a Web br
owser, and in the address line, type the IP address or host name exactly as it
displays on the product control panel. Press the Enter key on the computer keyboard. The EWS
opens.
NOTE: If the Web browser displays a There is a problem with this website’s security certicate
mes
sage when attempting to open the EWS, click Continue to this website (not recommended).
Choosing Continue to this website (not recommended) will not harm the computer while
n
avigating within the EWS for the HP product.
2. Click the Networking
tab to obtain network information. Change settings as needed.
Rename the product on a network
If you want to rename the product on a network so that it can be uniquely identied, use the HP Embedded
Web Server.
1. Open the HP Embedded Web Ser
ver (EWS):
a.
Fr
om the Home screen on the product control panel, touch the Connection Information
button, and then touch the Network Connected button or the Network Wi-Fi ON button to
displa
y the IP address or host name.
88 Chapter 8 Manage the product ENWW