User manual
b. Open a Web browser, and in the address line, type the IP address or host name exactly as it
displays on the product control panel. Press the Enter key on the computer keyboard. The EWS
opens.
NOTE: If the Web browser displays a There is a problem with this website’s security certicate
message when attempting to open the EWS, click Continue to this website (not recommended).
Choosing Continue to this website (not recommended) will not harm the computer while
navigating within the EWS for the HP product.
2. Open the System tab.
3. On the Device Information page, the default product name is in the Device Status eld. You can change
this name to uniquely identify this product.
NOTE: Completing the other elds on this page is optional.
4. Click the Apply button to save the changes.
Manually congure IPv4 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
1.
From the Home screen on the product control panel, touch the Setup button.
2. Scroll to and touch the Network Setup menu.
3. Touch the IPv4 Cong Method menu, and then touch the Manual button.
4. Use the keypad on the touchscreen to enter the IP address, and touch the OK button. Touch the Yes
b
utton to conrm.
5. Use the keypad on the touchscreen to enter the subnet mask, and touch the OK button. Touch the Yes
b
utton to conrm.
6. Use the keypad on the touchscreen to enter the default gateway, and touch the OK button. Touch the Yes
b
utton to conrm.
ENWW Congure IP network settings 89