Illustrated Parts & Service Map: 6200 Pro Series Microtower
HP Compaq 6200 Pro, MT 649706-001 page 2
System Board
Standard and Optional Boards
System boards with replacement thermal material
1 System board, includes Trusted Platform Module (TPM) 649515-001
* System board, does not include TPM 615114-001
Memory modules (PC3-10600, CL9)
21 GB
635802-001
*2 GB
635803-001
*4 GB
585157-001
Other boards
* HP WLAN 802.11 b/g/n 538048-001
* Antenna for use with 538048-001 583345-001
* nVidia Quadro NVS295 PCIe x16 graphics card, 256 MB 641462-001
* nVidia Quadro NVS300 PCIe x16 graphics card, 512 MB 632486-001
* nVidia GF405, DVI/VGA PCIe x16 graphics card, 512 MB 641732-001
* ATI Radeon HD6350 PCIe x16 graphics card, 512 MB 637995-001
* ATI Radeon HD6450 PCIe x16 graphics card, 512 MB 637996-001
* ATI Radeon HD6570 PCIe x16 graphics card, 1 GB 637997-001
* AMD FirePro 2270 PCIe x16 graphics card, 512 MB 637213-001
* Intel PRO/1000CT NIC, includes bracket 635523-001
* HP FireWire / IEEE 1394a PCIe x1 Card 637591-001
Intel Core i7 processors (include thermal material)
* 2600, 3.4 GHz, 8-MB L3 cache, 95W 638632-001
Intel Core i5 processors (include thermal material)
* 2500, 3.3 GHz, 6-MB L3 cache, 95W 638631-001
* 2400, 3.1 GHz, 6-MB L3 cache, 95W 638630-001
Intel Core i3 processors (include thermal material)
* 2120, 3.3 GHz, 3-MB L3 cache, 65W 638629-001
* 2100, 3.1 GHz, 3-MB L3 cache, 65W 638628-001
* Not shown
Common POST Error Messages
Screen Message Probable Cause Recommended Action
101-Option ROM Error 1. System ROM checksum
error.
2. Expansion board option
ROM checksum
1. Verify ROM, reflash if required
2. Remove suspected card, reboot
3. Clear CMOS memory, reboot
4. Replace system board
103-System Board
Failure
DMA, timers 1. Clear CMOS memory.
2. Remove expansion boards.
3. Replace system board.
164-Memory Size Error
and
201-Memory Error
Incorrect memory configu-
ration
1. Run Setup (F10).
2. Check DIMMs for proper
seating, type, and HP
compatibility.
3. Remove DIMMs singularly and
reboot to isolate faulty DIMM.
4. Replace system board.
214-DIMM Configura-
tion Warning
Populated DIMM configura-
tion is not optimized
Rearrange the DIMMs so that
each channel has the same amount
of memory.
301-, 304-Keyboard error Keyboard failure. Check keyboard connection or
keys. Check connector for bent of
missing pins. Replace keyboard.
If 304, possible system board
problem.
501-Display Adapter
Failure
Graphics display controller. 1. Reseat graphics card.
2. Clear CMOS.
3. Check monitor connection.
4. Replace graphics card.
1720-SMART Hard
Drive Detects Imminent
Failure
Hard drive is about to fail.
1. Determine if hard drive is giving
correct error message. Enter
Computer Setup and run the
Drive Protection System test
under
Storage > DPS Self-test
.
2. Apply hard drive firmware
patch if applicable.
3. Back up contents and replace
hard drive.
Miscellaneous Parts
1 Heat sink 645326-001
2 Fan chassis with guard 585884-001
3 Hood sensor 638816-001
4 Speaker, 40mm x 70mm 645330-001
5 Solenoid lock 641498-001
6 Chassis fan, 92mm x 92mm 636922-001
7 Printer port, PCI card 638817-001
* Serial port, PCI card 638815-001
* Fan duct assembly 646824-001
* Card reader, 22-in-1 636166-001
* Grommet, hard drive isolation, blue 594220-001
* USB powered speakers 571536-001
* Mouse, PS2, optical, jack black 537748-001
* Mouse, USB, BFR-PVC 590270-001
* Mouse, washable 619580-001
* Mouse, optical, jack black 444740-001
* Mouse, laser, jack black 570580-001
* USB 3.0 port, PCIe x1 card 616610-001
* eSATA port assembly, PCI card 645558-001
* Hard drive conversion bracket 397117-001
* Clamp lock, includes universal cable (plate not included) 508987-001
*Not shown
System Board Connectors and Jumpers (component location may vary)
SPKR Speaker connector MEDIA2 Media card reader connector
FRNT AUD Front panel connector HSENSE Hood sensor connector
FRONT_USB2
2nd USB connector X1PCIEXP1 PCIe X1 slot
FRONT_USB 1st USB connector X1PCIEXP2 PCIe X1 slot
SATA PWR0
Optical drive power connector X16PCIEXP PCIe X16 slot
SATA PWR1
Hard drive power connector PCI1 PCI slot
SATA0 1st hard drive (SATA 3.0) CHFAN Fan connector
PWR Main power connector PSWD Password header
SATA1 2nd hard drive (SATA 2.0) CMOS CMOS header
PWR CMD Power connector XUI
Processor socket
SATA2 1st optical drive (SATA 2.0) PWRCPU CPU power connector
ESATA eSATA connector DIMM4 Memory socket - Channel A
PAR Parallel port connector DIMM3 Memory socket - Channel A
COMB Serial port DIMM2 Memory socket - Channel B
MEDIA
Media card reader connector
DIMM1 Memory socket - Channel B
CHFAN2 System fan connector PB/LED Power switch connector
HLCK Hood lock connector