User manual

Print and interpret the print quality page
1. 2-line control panels: On the product control panel, press the OK button.
Touchscreen control panels: From the Home screen, touch the Setup
button.
2. Open the Reports menu.
3. Select the Print Quality Page item.
This page contains five bands of color, which are divided into four groups as indicated in the following
illustration. By examining each group, you can isolate the problem to a particular toner cartridge.
Section Toner cartridge
1 Yellow
2 Cyan
3 Black
4 Magenta
●
If dots or streaks appear in only one of the groups, replace the toner cartridge that correlates with that
group.
●
If dots appear in more than one group, print a cleaning page. If this does not solve the problem,
determine if the dots are always the same color; for example, if magenta dots appear in all five color
bands. If the dots are all the same color, replace that toner cartridge.
●
If streaks appear in multiple color bands, contact HP. A component other than the toner cartridge is
probably causing the problem.
Clean the product
Print a cleaning page
2-line control panels
1. From the product control panel, press the OK button.
2. Open the Service menu.
3. Use the arrow keys to select the Cleaning mode option, and then press the OK button.
The product prints the first side and then prompts you to remove the page from the output bin and
reload it in Tray 1, keeping the same orientation. Wait until the process is complete. Discard the page
that prints.
88 Chapter 6 Solve problems ENWW