User manual

3. Click the Color tab.
4. Select the HP EasyColor check box to clear it.
5. Click the Automatic or Manual setting.
●
Automatic setting: Select this setting for most color print jobs
●
Manual setting: Select this setting to adjust the color settings independently from other settings.
Click the Settings button to open the manual color-adjusment window.
NOTE: Changing color settings manually can impact output. HP recommends that only color
graphics experts change these settings.
6. Click the Print in Grayscale option to print a color document in black and shades of gray. Use this option
to print color documents for photocopying or faxing. Also use this option to print draft copies or to save
color toner.
7. Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK
button to print the job.
Calibrate the product to align the colors
Calibration is a product function that optimizes print quality.
Follow these steps to resolve print-quality problems such as misaligned color, colored shadows, blurry
graphics, or other print-quality issues.
2-line control panels
1. On the product control panel, press the OK button.
2. Open the following menus:
●
System Setup
●
Print Quality
●
Color Calibration
●
Calibrate Now
3. Press the OK button to start the calibration process.
A Calibrating message will display on the product control panel. The calibration process takes a few
minutes to complete. Do not turn the product off until the calibration process has finished.
4. Wait while the product calibrates, and then try printing again.
Touchscreen control panels
1.
On the product control panel, touch the Setup
button.
2. Open the following menus:
●
System Setup
●
Print Quality
ENWW Improve print quality 91