HP Officejet Enterprise Color MFP X585 / Flow X585 - Warranty and Legal Guide

Oświadczenia dodatkowe dotyczące urządzeń
telekomunikacyjnych (faksów)
Deklaracja operacji telekomunikacyjnych dla Europy
Niniejszy produkt jest przeznaczony do podłączania do analogowych sieci PSTN (Public Switched
Telecommunication Networks, publiczne komutowane sieci telefoniczne) w krajach/regionach Europejskiego
Obszaru Ekonomicznego.
Produkt spełnia wymogi dyrektywy R&TTE Directive 1999/5/EC (aneks II) Unii Europejskiej i został
odpowiednio oznakowany symbolem CE.
Aby uzyskać więcej szczegółowych informacji, należy zapoznać się z deklaracją zgodności producenta
zamieszczoną w innej sekcji tego podręcznika.
Jednak z powodu różnic między poszczególnymi krajowymi/regionalnymi sieciami PSTN, nie można
zagwarantować prawidłowej pracy urządzenia w każdym punkcie końcowym sieci PSTN. Zgodność sieci
zależy od prawidłowych ustawień wybranych przez klienta podczas przygotowywania połączenia z siecią.
Należy postępować zgodnie z instrukcjami podanymi w podręczniku użytkownika.
W przypadku pojawienia się problemów ze zgodnością sieci należy skontaktować się z dostawcą sprzętu lub
punktem pomocy firmy Hewlett-Packard w kraju/regionie, w którym urządzenie jest używane.
Podłączenie do punktu przyłączeniowego sieci PSTN może b
yć związane z ko
niecznością spełnienia
dodatkowych wymagań ustalonych przez lokalnego operatora PSTN.
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another device connected to the
same line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
back of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In
most, but not all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as determined by the total RENs, contact the telephone company
to determine the maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
PLWW Oświadczenia dodatkowe dotyczące urządzeń telekomunikacyjnych (faksów) 31