HP ProBook 4740s Notebook PC Maintenance and Service Guide

2. Remove the WLAN antennas from the routing path (1) and tabs (2) on the bottom of the
computer.
3. Place the computer upright and open as far as possible.
4. Pull the antennas through the hole that routes to the bottom of the computer.
5. Remove the WLAN antennas from the tabs (1) and the routing path (2) on the top of the
computer.
6. Remove the four Torx T8M2.5×7.0 screws (1) from the display hinges.
86 Chapter 4 Removal and replacement procedures