User Manual

7. Lift the hard drive (3), and then pull the hard drive (4) out of the hard drive bay.
Installing a hard drive
To install the hard drive:
1. Angle the hard drive (1) into the hard drive bay, and then lower the hard drive (2) into the hard
drive bay.
2. Pull the hard drive tab (3) to the left until the hard drive is seated. Tighten the 2 hard drive
screws (4) to secure the hard drive.
3. Align the tabs on the hard drive cover (1) with the notches on the computer.
4. Replace the service door (refer to
Removing or replacing the service door on page 61).
5. Replace the battery (refer to
Inserting or removing the battery on page 47).
64 Chapter 8 Drives