Dual-port Network Interface Card Installation

Step 2—Installing the dual-port NIC
1. Install the dual-port NIC by pressing it securely into the expansion slot (1).
2. Verify that the keyed components of the card align with the socket, then close the expansion slot
retention clamp (2).
Figure 2 Installing the dual-port NIC
Step 3—Reassembling the computer
1. Reinstall the card support, if applicable.
2. Reinstall the side access panel.
3. Reconnect power to the computer and all external devices.
4. Restore power to the computer and all external devices.
Step 4—Installing NIC software
For instructions on installing NIC software, see the driver CD supplied with this installation kit.
NOTE: At the time of component installation, look for device firmware and driver updates
designated for your computer model and operating system. You can obtain updates from
http://www.hp.com/#Support.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/manuals, then select your
product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。
http://www.hp.com/support/manuals にアクセス
し、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニューから
Japanese を選択してください。
4 Dual-port Network Interface Card installation ENWW