HP Z600 and Z800 Workstations - Mini SAS 4i Adapter installation

Blind-mate data cable connections
Use the Mini-SAS 4i adapter to connect a SAS HBA to internal SAS hard drives in HP workstations with
preinstalled blind-mate cabling plugged into the system board, such as HP
600 and HP 800
Workstations.
Figure 1 Locate and disconnect the blind-mate hard drive cables
Figure 2 Connect the blind-mate hard drive cables to the Mini-SAS 4i adapter cable
Figure 3 SAS HBA with 4 internal hard drives connected
2 Mini SAS 4i Adapter installation ENWW