H HE EW WLLE ETTTT--PPA AC CK KA AR RD DC CO OM MPPA AN NYY Firenze Wireless Radio Module BOI SB- 0410- 00 7 of 1
H HE EW WLLE ETTTT--PPA AC CK KA AR RD DC CO OM MPPA AN NYY FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. 54Mbps IEEE802.11g Wireless Network SPI adapter complies with Part 15 of the FCC Rules.
H HE EW WLLE ETTTT--PPA AC CK KA AR RD DC CO OM MPPA AN NYY end product must be labeled in a visible area with the following: "Contains TX FCC ID: B94BOISB0410 ".
H HE EW WLLE ETTTT--PPA AC CK KA AR RD DC CO OM MPPA AN NYY 1. Introduction 54Mbps IEEE802.11g Wireless Network SPI Adapter is the perfect solution for your wireless network applications based on the IEEE 802.11g standard offering a data rate of 54Mbps in a wireless LAN environment. BOISB-0410-00 is designed for Printer gives you wireless access the web and network resource without the wire.
H HE EW WLLE ETTTT--PPA AC CK KA AR RD DC CO OM MPPA AN NYY 2. Specification Product Description IEEE 802.11g Wireless LAN Radio Module for printer server application Host Interface SPI Host Interface Connector 12-Pin 1mm LIF Vertical FFC * Operating Voltage Regulate DC 3.3V± 5% from DC 24V± 10% input LED One blue LED (DIP LED HLMP-KA45-E00A1) Flash 4Mbit SPI flash Chipset Mac/BB Marvell 88W8385 Integrated 802.
H HE EW WLLE ETTTT--PPA AC CK KA AR RD DC CO OM MPPA AN NYY Operating Frequency IEEE 802.11b/g ISM Band ♦ USA(FCC): 2.412GHz ~ 2.462 GHz (CH1 ~ CH11) ♦ Europe(ETSI): 2.412 GHz ~ 2.472 GHz (CH1 ~ CH13) ♦ Japan(TELEC) : 11b: 2.412 GHz ~ 2.484 GHz (CH1 ~ CH14) 11g:: 2.412 GHz ~ 2.
H HE EW WLLE ETTTT--PPA AC CK KA AR RD DC CO OM MPPA AN NYY 3. Hardware Installation The following sections in this chapter describe how to install BOISB-0410-00 Module 3.1. Installation Overview BOISB-0410-00 wireless module is design for Printer only. 3.2. Safety Recommendations The safety guidelines are as follows: λ Keep the board area clear and dust-free before, during, and after installation. λ Keep tools away from walk areas where you and others could fall over them.