Brocade 16Gb SAN Switch for HP BladeSystem c-Class User Guide

4 Support and other resources
This guide provides information about setting up and configuring the Brocade 16Gb SAN Switch
for HP BladeSystem c-Class. Throughout this guide the short product name, 16Gb SAN Switch is
used. The following publications contain related information:
• Fabric OS Command Reference Guide
• HP Fabric OS Administrator Guide
• Fabric OS MIB Reference Guide
• Fabric OS System Error Messages Reference Manual
Intended audience
This guide is intended for system administrators and technicians with knowledge of:
• Configuration aspects of customer SAN fabric
• Customer host environments, such as Microsoft Windows or Linux
• CLI commands
• Advanced Web Tools GUI for configuring the switches through a supported web browser
SAN Switch related documentation
SAN Switch-related documents and other SAN infrastructure documentation, including white papers
and best practices documents, are available at: http://www.hp.com/support/manuals
Scroll to the storage section of the web page and select Storage Networking for HP Storage
products.
IMPORTANT: For late-breaking, supplemental information, access the latest version of the HP
Fabric OS Release Notes for the 16Gb SAN Switch.
HP BladeSystem c-Class related documentation
HP BladeSystem c-Class enclosure user documentation, including white papers and best practices
documents, are available at:
http://www.hp.com/go/bladesystem/documentation
Before you contact HP Technical Support
Be sure to have the following information available before you call HP:
• Technical support registration number (if applicable)
• Product serial number
• Product model name and number
• Applicable error messages
• Third-party hardware or software
• Operating system type and revision level
For continuous quality improvement, calls may be recorded or monitored.
HP contact information
For the name of the nearest HP authorized reseller:
• In the United States, see the HP US service locator web page:
nl
Intended audience 27