Brocade EZSwitchSetup Administrator's Guide - Supporting Fabric OS v5.3.0 and Brocade 200E, 3250, 4100, 4900, 5000 (53-1000441-01, June 2007)

16 EZSwitchSetup Administrator’s Guide
53-1000441-01
Select Zoning
2
a. Enter the number of HBA connections that you want to configure and are currently
connected to the switch. You can change this setting later if you want to add or remove
HBA connections.
b. Enter the number of storage connections you want to configure and are currently
connected to the switch. You can change this setting later if you want to add or remove
storage connections.
2. Click Next. The Connect Devices screen displays (Figure 14 on page 17).
FIGURE 13 Specify Devices Screen