Brocade EZSwitchSetup Administrator's Guide - Supporting Fabric OS v5.3.0 and Brocade 200E, 3250, 4100, 4900, 5000 (53-1000441-01, June 2007)

18 EZSwitchSetup Administrator’s Guide
53-1000441-01
Connect Devices and Complete the Setup
2
c. Close the latching bale.
FIGURE 15 Installing SFPs
2. Connect Fibre Channel cables from the switch to your host and storage devices. Make the
physical connections exactly as indicated on the Device Connection screen.
a. Remove any plastic protectors from the Fibre Channel cable ends, and position the cable
connector so that it is oriented correctly.
b. Insert the cable connector into the SFP until it is firmly seated and the latching mechanism
clicks.
1 Brocade switch 3 Position SFP and insert until firmly seated
2 Open the SFP bale 4 Close the latching bale
IOIOI
!
scale: 1/2" = 1"
IOIOI
!
3
2
1
1
A
B
4
4-01