Brocade EZSwitchSetup Administrator's Guide - Supporting Fabric OS v5.3.0 and Brocade 200E, 3250, 4100, 4900, 5000 (53-1000441-01, June 2007)

20 EZSwitchSetup Administrator’s Guide
53-1000441-01
Connect Devices and Complete the Setup
2
The Finish screen displays.
FIGURE 17 EZSwitchSetup Configuration Finish Screen
5. Click Finish to complete the switch setup.
You are now ready to configure the storage component of the SAN using the documentation
that came with the storage server.
If you want to monitor the switch, then you need to launch the EZSwitchSetup Switch Manager.
See Chapter 3, “Managing Your Switch” for instructions on using this interface.